Car Racks

- Add some attitude to your vehicle with these fun assorted hitch covers from Trick Topz - Fits 2" hitches

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

- Small wheel adapter for use with the HRT-100 trike rack - Bolt-on plate allows carrying trikes with 16" wheels

He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

Thru-axle adapter for the Kuat TRIO rack.

Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones

Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver. - Adds extra security to bike racks and hitch devices - Eliminates rattling and wobbling - Compatible with 2" receivers

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

Sunlite's versatile Bike Block Quick Release Fork Mount is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. And, the Bike Block is made of heavy-duty metal for strength and reliability. Plus, it features a pass-through hole for locking your rig with a cable lock, too.

Piston Fender Strap Kit

- Great for storage or transportation - Can be mounted vertically or horizontally - Alloy construction

- Great for storage or transportation - Alloy construction - Can be mounted vertically or horizontally

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.

We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.

We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish

- Rigid 6061-aluminum body with 9mm skewer

Hitch Lock V4 - 2"

Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).

Delta's Wheel Holder mounts to any flat surface to keep bikes stabilized. - Holds front wheel in place - Rigid steel stays with 9mm dropouts - Mounts to any flat surface

- QR fork mount for storage or transportation - Includes hardware for mounting to factory truck-bed track systems - Durable alloy construction

- Universal fork mounting block for transportation or home storage - Includes adapters to work with standard QR, 12mm, and 15mm thru axles including boost applications - Durable alloy construction - Skewer not included

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks

- Powdercoated steel body with 9mm skewer & hole in handle for padlock

Having trouble getting your non-traditional bike onto your trunk or hitch rack? Struggle no more with Hollywood's Bike Adapter Pro. It quickly attaches to most bikes to form a top tube and makes it easier than ever to safely and securely attach it to your rear rack.

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

- The Bike Beam LT creates a top tube for mounting non-traditional bike frames - Easy to use, the rotating clasp feature ensures that your Bike Beam LT is securely installed on your bicycle - For use with racks where bikes are secured by the top tube, such as hanging style hitch racks, trunk racks or home bike storage solutions - Length adjusts to fit most bikes

Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.

So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes

The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

Easy to move rack to/from vehicle without any lifting, this wheeled dollie attaches quickly t- most 2" receiver compatible racks - Wheels ensure smooth and effortless transport of rack to/from vehicle without any lifting - Connects to 2" stinger with simple pin - Works with most Saris hitch racks and other racks that bolt t- vehicle receiver - Easy to remove

Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.

Origin-8's Bike Block Fork Mount can be mounted to almost any flat surface and securely holds your bike by the fork. It's made of sturdy steel and works with quick release 9mm dropouts as well as 15mm and 20mm through axles!

Got a downhill bike - Fully padded cradle accommodates dual-crown suspension forks - For use with HangTight 4 and 6 only - Accommodates 1 bike up to 37.5 lbs. - Fits most modern flat and drop-crown style dual-crown suspension forks

RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

Bike fork mounts you can put anywhere, including truck beds, minivans and SUVs An all-in-one design that fits four thru axle spacing standards: - 15mm x 100mm - 15mm x 110mm - 12mm x 100mm - 20mm x 110mm - Mounts directly to any flat surface for bike transport or storage - Ultimate stability and versatility when mounted t- Saris Triple Track or Single Track (sold separately) - Mounting hardware not included

- Adapts female specific and full suspension frames to be easily hung on car rack carriers - Locking ends ensure a firm hold on the bicycles seat tube and head tube for a secure fit - Makes transporting an unconventional frame by car rack much easier - Extends from 21.5" to 31" eye to eye

Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.

- Versatile: Accommodates all 15mm & 12mm thru-axles. - Flexible: Adapter for most roof racks (Thule, Yakima, Kuat) - Quick Assembly: Easy mount on any flat surface - Fully Adjustable: Thumb screw inserts allow for instant adjustments - Construction: Lightweight aluminum and steel

Getting pressurized water to your destination just got even easier. The EXO RoadShower Kit lets you attach the RoadShower 4G and 7G to your EXO system giving you more mounting options for your RoadShower. Product Details - Connects RoadShower 4G and 7G to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Tool-free, locking SpeedKnobs attach and lock RoadShower 4G and 7G to EXO SwingBase or EXO TopShelf - Heavy-duty steel construction with durable, powder-coated finish - Includes all mounting hardware (EXO System and RoadShower are sold separately) - Not compatible with RoadShower 10G Product Specs - Weight: 2.46 lbs. - Dimensions: L 14.00 in x W 3.00 in x H 4.00 in

- Heavy-duty, rust-free AL6061-T6 construction - Mounts vertically or horizontally - Great for storage and transportation - Compatible with the following fork spacing: - 9mm x 100mm (Standard QR) - 12mm x 100mm - 15mm x 100mm - 15mm x 110mm (Standard Boost) - 20mm x 110mm - Includes all axle adapters and QR skewer - Use: Fork Mount - Hitch Size/Mount: 100/110mm Spacing

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

Set of heavy duty wheel holders for Fat tire E-bikes and regular fat bikes for tires up to 5" wide

Introducing the DropTop; our next locking bike fork mount that grows upon years of feedback and use. The DropTop utilizes a TPU overmolded shim to allow for both 12mm and 15mm axles to fit without the need for switching shims out. It is based upon the same clamshell design as the DriveShaft series, which allows for easy loading and adapts to minor differences in axle diameter or contouring. The DropTop also includes mounting holes for both horizontal and vertical mounting orientations, it replaces both the DriveShaft HM and DriveShaft Track Mounts. - The only locking thru-axle track mount for truck and van tracks - Compatible with 12mm, 15mm, & 20mm thru axles up to 110mm wide (for 20mm, shims must be removed) - Vertical and horizontal mounting positions - TPU overmolded shim eliminates the need to switch out shims for 12mm or 15mm axles - Anti-Theft: TPU surface provides sufficient friction to stop the axle from being removed when DropTop is firmly clamped and locked - Can fit QR bikes with our 9mm QR with Dummy Axle - sold separately - Wide mouth opening to easily load your bike and a locking T-Bolt that adjusts for a tighter hold so the thru-axle cannot be removed when locked - Carries 1 bike, up to 45 lbs - Lock core, keys, and Track Hardware Included - For 9x100mm quick release or bolt on axles only, you can use the Dummy Axle with your DropTop. Fitment Note: Due to the nature of the DropTop clamp not bracing the fork legs outward, there will be play when used with Mavic Speed Release and Specialized 12mm forks with an oversized non threaded fork leg. For those instances, please use a HotRod instead Fitment Note: DropTop is NOT compatiblle with Lefty fork mount from Cannondale. RockyMounts does not have a compatible mount for Lefty at this time.

For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.

Piston E-Bike Ramp

Trail Doc accessory kit for the NV Base 2.0 rack from Kuat Racks.

Having enough room for another bike is rarely an issue with Saris' Traps Triple Track. Simply lay it on the floor of your SUV or place it in your truck bed and add your choice of attachments. Your bikes are guaranteed a stable ride. The unique design allows bikes to be staggered or angled for hauling more bikes in a compact space. Fork mounts and wheel holders are sold individually to let you customize your Triple Track.

Sunlite's versatile 3-Bike Trunk Rack carries three bikes and fits almost any vehicle. Positive locking straps attach the rack to your car and provide fast, simple installation. Vinyl-coated hooks and arms protect your bike and your car's finish. And when not in use, this rack folds flat for storage.

Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Having enough room for another bike is rarely an issue with Saris' Traps Triple Track. Simply lay it on the floor of your SUV or place it in your truck bed and add your choice of attachments. Your bikes are guaranteed a stable ride. The unique design allows bikes to be staggered or angled for hauling more bikes in a compact space. Fork mounts and wheel holders are sold individually to let you customize your Triple Track.

The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only

Designed with the eBike enthusiast in mind, the MHS Ramp makes heavy lifting and awkward bike loading a thing of the past. Simply connect the American-made ramp to any MHS DUO tray and roll your ride into position with minimal effort. Once bicycles are loaded, collapse and stow the ramp for storage – and save your energy for the adventure ahead. - Bike ramp for MHS Duo tray style hitch rack configurations. - Easily roll bikes (up to 100 lb.) onto any MHS Duo tray, eliminating heavy lifting. - Stow and go with the MHS Ramp’s folding design. - Ideal for heavy bicycles, including eBikes. - Built with durable American-made steel.