Reach peak inflation pressure in a flash with Topeak's Peak DX II. Its butted-aluminum barrel and folding T-handle makes pumping up tires a snap! Plus, the thumb-lock SmartHead grips tight on both Presta and Schrader valves.
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
$29.95 - $39.95
Coil hose made is USA is superior to imported coil hoses. Rated for high pressure and durability. Brass swivel ends on both ends of the hose. Standard 1/4” NPT threads. Narrow hose increases strength and reduces waste when using Nitrogen. Short length hose recommended when your inflation source is close to your work or is portable and is usually moved to your work. Great for Nitrogen and small portable Air Compressors. Vibraseal coated threads, no thread tape or sealant needed!
$4.95 - $5.95
Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz)
Portland Design Works' incredibly lightweight and compact Tiny Object CO2 Inflator efficiently fills flats. Use the control knob to dial in the perfect pressure while the included leather sleeve protects your hands from frosty CO2 cartridges. Its rugged alloy body is built to withstand years of road- and trail-side repairs. - Presta valve compatible - Control knob easily regulates CO2 flow - Full grain leather sleeve is vegetable tanned and conditioned with natural oils and waxes - Lifetime PDWarranty
If you're rolling on fat tires, the Fat Max 15 is for you. Most tire gauges just don't offer the precision needed for fat tires where 1 or 2 psi can make a huge difference. The strong and durable Fat Max 15 is specifically designed to read tire pressures from 2-15 psi so you can take the guess work out of finding the right pressure for your fat tire bike. - Designed with a low pressure range of 2-15 psi specific for fat bike tires - Durable case and crystal lens - Retains reading until reset - White face plate for easier reading - Compatible with Presta valves with removable core - Presta/Schrader adaptable head - Length: 120mm - Weight: 101 grams
The Airlift 220 is a single action mountain bike pump that is small enough to bring along on the trail. It features full-body alloy construction with a cross-hatch texturing for better grip in slippery situations. - Smart head fits on both Presta and Schrader valves - Compact, 5-inch hose extends for easier operation - Rubber seal holds pump handle in place - Includes a frame mount and two 4mm bolts - Pumps up to 80 psi maximum pressure
These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.
- For use with Bontrager CO2 cartridges - Regulator design provides safe, controlled operation - Reusable cartridge insulator keeps hands protected while inflating - Compact and lightweight design is easy to store for any ride - Spring-loaded mechanism regulates airflow for both Presta and Schrader valves
Bontrager's Air Support Road hand pump is a highly durable pump with a small volume chamber for quick inflation of higher-pressure tires up to 115 psi. The fold-out lever locks the pump head securely to the valve for consistent airflow into the tire. Use the included bracket to easily mount it under your bottle cage. Available in two lengths: Long for more air per stroke, or Short for an easy fit into a jersey pocket.
Bontrager's Air Support HV is a life-saver when you flat out on the trail. A large volume chamber makes it a breeze to use on fat mountain bike tires. It has an easy-to-use thumblock, an auto-selecting head that fits Presta and Schrader valves, plus a fold-out T handle and a dual action for fast inflation. The Air Support HV is compact and light and it comes with a mount to carry it on your frame.
A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)
A versatile floor pump that allows for easy transition between high volume and high pressure settings. A pump for road and MTB The Dual Charger Pump is versatile floor pump with multiple pressure settings that let you easily inflate high-pressure road tires and larger volume hybrid and MTB tires. A quick flip of the switch moves between settings, making it perfect for riders who own both a road and mountain bike. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy to read 4-inch base-mounted gauge - Base-mounted switch allows for easy transition between high volume and high pressure settings - High volume setting allows for quick inflation - High pressure setting allows for easy inflation as PSI increases - Max pressure 160 psi (11bar)
For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
The most compact, lightweight Dual Action pump with gauge that road riders can fit anywhere. Large integrated 1-1/8" diameter easy-to-read analog gauge provides the perfect inflation every time. Dual-Action (DA) doubles volume with each stroke and inflates tires to 120psi / 8bar. Integrated dust cap keeps pump head clean and thumb-lock lever ensures an air-tight seal. - Head: Presta with integrated dust cap - Barrel/Thumb Lock: Aluminum - Handle: Polymer - Capacity: 120psi / 8bar, 1-1/8” Analog - Volume Per Stroke: 36 cc (pull + push) - Added Features: Dual action pumping head - Side mount bracket - Size: 21.8 x 3.4 x 3.1cm / 8.6” x 1.3” x 1.2” - Weight: 116g / 4.09oz
The Roadie TT Twin Turbo is a full-metal, pocket-sized mini pump that transfers larger air volume from a bigger diameter outer chamber into a smaller diameter inner chamber to deliver more air at higher pressures to fill tires 50% faster and easier. Integrated dust cap keeps pump head clean and thumb lock lever ensures an air-tight seal. - Head: Presta with integrated dust cap - Barrel / Thumb Lock / Handle: Aluminum - Capacity: 160psi / 11 bar - Volume Per Stroke: 41.4cc - Side mount bracket - Size: 19.5 x 3.3 x 2.35cm / 7.7" x 1.3" x 0.9" - Weight: 100g / 3.53oz
Advancing the award-winning Morph with high tech—introducing the Turbo Morph Digital. Top-mounted flip-down digital gauge makes reading pressure easy and provides accurate tire pressure up to 160 psi / 11 bar. The fold-out foot peg and flexible hose provides excellent stability for more efficient pumping. Specs - HEAD: Presta / Schrader / Dunlop valves - BARREL: Butted aluminum - GAUGE: Flip-down digital, 160 psi / 11 bar - BATTERY: CR2032 x 1 (included) - VOLUME PER STROKE: 103.2 cc - THUMB LOCK: Plastic - HANDLE: T-type dual density polymer - SIZE: 35 x 7 x 4.3 cm / 13.8” x 2.8” x 1.7” - WEIGHT: 320 g / 11.29 oz Added Features - Fold-out foot peg - Flexible hose - Centerline mount bracket
Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.
This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass
Now 50mm higher than before, the Air X-Press 8.0 is an upgrade of our sturdy and lightweight plastic floor pump with an accurate gauge for precise pressure control. - Displays both bar and PSI - Convenient handling due to proven SKS MULTI VALVE pump head with thumb lock lever - Inflates easily up to 8 bar/115 PSI
SKS's AirKompressor 12.0 Floor Pump can handle it all. The E.V.A. head works with all valves and the 174 psi/12 bar max pressure lets you fill up even the highest quality road tubulars. Fat mountain tires are also easy to air up, too, thanks to the high-volume, extra-long steel body. And, an oversize gauge and long hose make the AirKompressor perfect for every job.
- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible
Airflex Explorer Mini Pump is a small pump with great impact. The hose, stored in the pump tube, screws onto the valve head. Flexible hose prevents damage to valve stem during inflation. Pump handle is soft, easy-to-grip compound. Great pump for MTB or urban bikes. Small enough to fit in jersey pocket, but also includes a frame mount. - Inflates to 5 bar/73 psi - Compatible with Presta, Schrader, and Dunlop Valves - Includes a holder which attaches at cage mount - Length: 205mm - Weight: 132 grams - Made in Germany
Page 1 of 5 Next page